Driven by the trend of industry 4.0, most industries began to introduce automation equipment. The automatic solder machine has also become a hot topic in the hearts of major bosses in this automation upsurge. However, when the machine always fails, what to do if the solder machine breaks down? This problem has puzzled most manufacturers. Today, Shangqing automation equipment will solve the following problems for you.

1. No tin can be delivered by hand. In this case, we need to reflect on whether the adjusting bolt of the tin feeding system device is adjusted in place.

2. The power is on, but the machine is not powered on. Check whether the power switch is opened normally; whether the socket is loose; check whether the fuse is broken.

3. The system does not reset. First, check whether the power supply is normal; second, check whether the driver is normal; third, check whether the shape of the sensor is normal

4. The handheld teaching device does not display the phenomenon of disordered code. In this case, please go back to the standby interface, press F2 to refresh, and see if the bit wiring is loose. Before connecting the tutor, confirm that it has been powered off, and then power on again.

5. The automatic soldering machine cannot be started. Check whether the output is completed and the output has been cleared after completion; check whether the start button is normal and control the device with a hand-held box; check whether the device is authorized and press the start button screen to pop up the registration dialog box, indicating that the device is not authorized to use.

6. Communication is abnormal. Check whether the serial port wiring is damaged; check whether the equipment has completed the reset action; in the process of equipment work, only some commands such as "reset" and "pause" can lose the reference, and other commands will not.